nic components www.niccomp.com www.lowesr.com www.rfpassives.com 1 ? features ? voltage: 50 to 1000 volts, current; 1.0 ampere ? corresponds to 1n4001 thru 1n4007 in surface mount package ? flat pack - low profile, for surface mount applications ? glass passivated chip construction ? high temperature soldering (250 o c/10 seconds) ? easy pick and place surface mount silicon rectif er diode nrd series mechanical data: size: sma/do-214ac case: molded epoxy terminals: solder plated copper alloy polarity: indicated by cathode band standard packaging: 12mm tape (eia-rs-481) weight: 0.064 gram maximum ratings (at t a =25 0 c unless otherwise noted) electrical characteristics (at t a =25 0 c unless otherwise noted) notes: 1. thermal resistance junction to terminal, 5mm 2 (0.013 mm thick) copper land patterns. 2. measured at 1.0 mhz and applied average voltage of 4.0vdc. 3. reverse recovery test conditions: if=0.5a, ir=1.0a, t rr =0.25a dimensions (mm) 1.25~1.45 0.76~1.27 4.93~5.28 .8~1.3 1.98~2.29 0.1~0.2 cathode 2.54~2.79 3.99~4.50 ratings symbol nrd4001 nrd4002 nrd4003 nrd4004 nrd4005 nrd4007 units maximum recurrent peak reverse voltage vrrm 50 100 200 400 600 1000 volts maximum rms voltage vrms 35 70 140 280 420 700 volts maximum dc blocking voltage vdc 50 100 200 400 600 1000 volts maximum average forward rectif ed current ta=75c io 1.0 amps peak forward surge current 8.3ms single half sine- wave superimposed on rated load (jedec method) ifsm 30 amps characteristics symbol nrd4001 nrd4002 nrd4003 nrd4004 nrd4005 nrd4007 units maximum forward voltage at 1.0a dc vf 1.1 amps maximum full load reverse current full cycle average @ta=75c ir 30 amps maximum dc reverse current at rated dc blocking voltage @ta=25c 5.0 amps @ta=125c 50 amps maximum thermal resistance (note 1) rqjl 30 c/w typical junction capacitance (note 2) cj 15 pf operating and storage temperature range tj, tstg -60 ~ +150c c maximum reverse recovery time (note 3) t rr 2.5 s tape and reel reel qty: (5k & 7.5k) part numbering system voltage designator (see table below) nrd 4004 tr -5k f series rohs compliant rohs compliant includes all homogeneous materials *see part number system for details
nic components www.niccomp.com www.lowesr.com www.rfpassives.com 2 ? surface mount silicon rectifer diode nrd series 0 60 80 100 40 20 1.0 0.001 0.01 0.1 100 10 tj=100c tj=75c tj=25c 0 6 10 20 40 60 2 20 5 10 15 30 25 1 100 single phase half wave 60hz resistive or inductive load pcb mounted 0n 0.315"x0.315" (8.0x8.0mm) copper pad areas average forward current (amps) 3.0 2.5 2.0 1.5 1.0 0.5 0 0c 50c 100c 150c derating curve for output rectifed current temperature (c) tj=25c pulse width=300 s 2% duty cycle 0.4 1.0 1.2 1.4 1.6 1.8 0.8 0.6 1.0 0.1 0.2 0.4 100 40 20 10 2.0 4.0 instanteous forward current (amps) instanteous forward voltage (volts) typical instanteous forward charateristics per element maximum non-repetitive peak forwardsurge current capacitance (pf) reverse voltage (volts) number of cycles at 60hz typcial junction capacitance per element tj=25c f=1mhz vsig=50mvp-p 10 1000 1.0 0.1 100 1 20 2 10 100 50 thermal impedance (c/w) heating time (seconds) transient thermal impedance units mounted on 20in 3 (5.4mm 3 ) +0.5mil inches (0.013mm) thick copper land areas 1.0 100 0.1 0.01 10 1 20 2 10 100 50 5 typical peak reverse characteristics percentage of peak reverse voltage forward surge current (amps pk) (half sine-wave) instanteous reverse current ( a) ratings and characteristics curves (nrd4001 thru 4007 75c
|
